Pressure Ranges from 0-50 PSIG
through 0-10,000 PSIG
Approved Explosion-Proof for Class
1, Div. 1 and Class 1, Div. 2
Hazardous Locations
One Piece 316L Stainless Steel
Sensing Diaphragm With No Welds,
O-rings or Seams
Rugged Factory-Sealed Case
Withstands Harsh Environments,
Shock and Vibration
Specifications:
Over Range
Protection: 2X full scale Burst Pressure: 5X full scale Cycle Life: >100 million cycles Fitting Type: 1/4” NPT male Wetted Materials: 316 L Stainless Steel;
others available on
request Output: 4-20 mA 2-wire Power Supply: 10-28 VDC
The KOBOLD KP46 series explosion-proof
pressure transmitter is approved for use in
hazardous locations per CSA standard 30
and U.L. standard 1203 for Class 1, Division
1 and Division 2 locations. The wetted parts
are all 316L stainless steel for compatibility
with a wide variety of media. Wetted
materials and construction comply with
NACE MR0175. Other wetted materials
such as 17-4 PH stainless or inconel are
available on request. The fitting and
sensing diaphragm are machined out of a
single piece of material so there are no
welds, seams or o-ring seals resulting in
excellent long term performance and
stability.
The case is factory sealed making the KP46
series very rugged with excellent shock and vibration resistance. The KP46 is perfect for
explosion proof applications where both
price and performance are critical.
